Mime-Version: |
1.0 |
Sender: |
|
Subject: |
|
From: |
|
Date: |
Thu, 4 Apr 2002 09:51:27 +0000 |
Content-Type: |
text/plain; format=flowed |
Reply-To: |
|
Parts/Attachments: |
|
|
hi,
has the mobo got a jumper on it for enabling usb?
if so check it is set to enable their use.......
>I've just installed a new mobo and after installing a clean Win98se os,
>everything works fine but the usb ports. Back panel ports as well as the
>mobo on board extra front panel socket on the mobo. I configured the bios
>to enable the ports and, they show up in device manager as working properly
>but when I plug any usb device into the ports (after installing the
>software first) the devices are not found. I then installed a PCI (2
>port)card on one of the pci slots and they work fine. Any answers? The
>following specs are:
>Gigabyte GA60XM7E mobo, Intel celeron 667mhz, 128mb pc100 ram, Intel 815E
>chipset on mobo, S3 savage 2000 video card, etc. etc. Am I missing
>something here? TIA, Edwin Bogert
>
_________________________________________________________________
MSN Photos is the easiest way to share and print your photos:
http://photos.msn.com/support/worldwide.aspx
Do you want to signoff PCBUILD or just change to
Digest mode - visit our web site:
http://freepctech.com/pcbuild.shtml
|
|
|