Subject: | |
From: | |
Reply To: | |
Date: | Mon, 4 Mar 2002 18:06:43 -0600 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hi Randy: I would dearly love to go into my bios and check for any
descrepencies that may be there however, you'll have to understand that I
cannot even get to a post beep to enter my bios screen. How would I do that.
Everyone tells me to look at my bios when I can't even get that far along.
Got any more ideas? Thanks Edwin Bogert
>From: "Randy J. Anderson" <[log in to unmask]>
>Reply-To: PCBUILD - Personal Computer Hardware discussion List
><[log in to unmask]>
>To: [log in to unmask]
>Subject: Re: [PCBUILD] Bad news motherboards?
>Date: Mon, 4 Mar 2002 12:54:16 -0500
>
>Edwin Bogert, with the long continous bleeping, it's 99% a problem with
>the RAM module(s). If some of the other PCs boot with those RAM modules,
>it's a excellent chance that the RAM setting timing in the BIOS is set to
>CAS 2.
>The RAM module(s) probably don't support CAS 2. Hence, CAS 3 is REQUIRED.
>Having the incorrect CAS setting (in the BIOS) can and will on my system,
>cause
>the system to fail to detect the RAM. Make sure it's seated properly. If
>you
>don't feel to clicks when inserting the RAM modules, they are probably not
>seated all the way in place. It could happen if on a 66 mhz bus, you are
>attempting to use PC100 SDRAM or the other way around.
>
>--Randy J. Anderson--
>
> PCBUILD maintains hundreds of useful files for download
> visit our download web page at:
> http://freepctech.com/downloads.shtml
_________________________________________________________________
Send and receive Hotmail on your mobile device: http://mobile.msn.com
PCBUILD's List Owners:
Bob Wright<[log in to unmask]>
Drew Dunn<[log in to unmask]>
|
|
|