Mime-Version: |
1.0 |
Sender: |
|
Subject: |
|
From: |
|
Date: |
Sun, 25 Feb 2001 09:07:49 -0800 |
In-Reply-To: |
|
Content-Type: |
text/plain; charset="us-ascii"; format=flowed |
Reply-To: |
|
Parts/Attachments: |
|
|
Hey George,
I have built several systems.
I have bought the usual cheap cases.
I have learned the hard way, not to go for the cheap.
The BEST Cases around I have found come from PCPower&Cooling.Com
They are built very strong, and are a joy to work with.
They are arranged very well.
The only problem is they are not cheap!!
But if you want a good case you won't cut yourself on, and spend less time
and aggravation get one!!!!
They run between 100 bucks all the way to about 300 bucks depending on what
you want.
I got a mid tower, mounting kit, 300watt (High End), extra drive cage
(3.5"), 2-extra case fans,
case heat monitor for around 220 bucks. By the way don't scrimp on the
power supply either.
A 250-350 watt is best. Of course anything over a 250watt is not going to
be cheap, but again they are
excellent power supplies. There full towers will cost quite a bit more!!
If you have questions for me you can email me at [log in to unmask]
Brad Feuerhelm
Original Message:
>Greetings All,
>
>I am preparing to build a system based around an Asus A7V motherboard with a
>Duron 700 or 800 MHz processor. I would be interested to hear any
>suggestions as to which cases you all have had good experiences with. A
>mid-tower is adequate for my needs, though a full-tower is not out of the
>question. I have been looking around at shows and such, but I am
>overwhelmed by the selection, and often the quality seems very poor.
>Comments and suggestions would be greatly appreciated.
>
>George
The NOSPIN Group provides a monthly newsletter with great
tips, information and ideas: NOSPIN-L, The NOSPIN Magazine
Visit our web site to signup: http://freepctech.com
|
|
|