Mime-Version: |
1.0 |
Sender: |
|
Subject: |
|
From: |
|
Date: |
Tue, 13 Jun 2000 23:37:36 -0400 |
In-Reply-To: |
|
Content-Type: |
text/plain; charset="us-ascii" |
Reply-To: |
|
Parts/Attachments: |
|
|
At 12:51 PM 06/13/2000 Don Kendrew wrote:
>
>A friend has asked me to install a super floppy (LS120), in his computer.
>He purchased an OEM model that came without any documentation or setup disk.
>
>I assumed that I should just replace the existing floppy drive . . . .
Don:
The LS-120 is an IDE device. If you don't have BIOS and/or Windows 9X
[LS-120] support, you have to use the drivers. The SUPERDISKs, as they are
also known, are standard ATA (IDE-based) Removable Media Devices, so you
have to configure them as a master or a slave on the IDE channel and
connect them to a 40-pin IDE cable. You don't need to set any special CMOS
settings. You should not have any problems if you have a current system
and use Windows 98 or later. Earlier versions of Windows 95 (and DOS)
require the drivers.
You can get more information, support and drivers at:
http://www.superdisk.com/
You should retain the 1.44 MB floppy disk drive. Although some people use
the LS-120 as an A: drive, you'll require L-120 support in BIOS for boot
purposes. Replacing a floppy drive (a low-tech but mostly reliable/useful
boot drive) with a LS-120 is not recommended and can be problematic.
I installed LS-120 drives in all my computers and I have an external,
Parallel Port LS-120. Works fine for my needs, which includes carting
around a large number of often changing files, and backing up data from
other people's PCs (the LS-120 real mode drivers/TSRs will fit on a 1.44 MB
boot floppy).
HTH.
John Chin
Visit our website regularly for FAQs,
articles, how-to's, tech tips and much more
http://nospin.com - http://nospin.org
|
|
|