What I do, is go to an electronics store, such as radio shack and purchase
an adapter that allows you to plug 2 items into the speaker (out) this will
allow for your speakers, and a set of headphones. Juyst make sure you get
the connector for Stereo, and not Mono...

Good Luck,   steve wolfe

----- Original Message -----
From: "Ryo Imamura" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Wednesday, October 04, 2000 12:36 AM
Subject: [PCBUILD] Using both speaker and headset?


> I have a Soundblaster sound card with 3 female jack connectors that are
colored green, red and black.  My computer speaker is connected to the green
jack.  I want to add a headset so that I can use dialpad, one of those free
PC to phone programs.  The headset has red and black male plugs, which I
plugged into the red and black colored holes in the SB sound card.  When I
converse on dialpad, the sound comes through the computer speaker rather
than the headset causing a lot of feedback.  How do I get the headset
speaker to work (the mic works fine)?  Do I need to unplug the computer
speaker?  Is there some type of toggle switch so that I can switch easily
between using the computer speaker and the headset.  Thanks.  Ryo
>
>                   Visit our website regularly for FAQs,
>                articles, how-to's, tech tips and much more
>                   http://nospin.com - http://nospin.org

                  Visit our website regularly for FAQs,
               articles, how-to's, tech tips and much more
                  http://nospin.com - http://nospin.org