I made a boot disk but system still hangs. Let me walk you thru the problem:
Turn the computer on, the disk drive flashes, so I know it is booting from
Drive a, I get the message
Diskette drive 1 seek failure, invalid confg info, run setup program
I run the setup program, it says INCORRECT config data in CMOS, setup will
attemp to correct and auto configure. It does this, cmos files recognize all
drives, etc, everything looks correct . I save, exit, but still wont
boot...get same message...any ideas?
RAY
----- Original Message -----
From: "alanpriol" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Wednesday, July 05, 2000 10:39 PM
Subject: Re: [PCBUILD] System wont boot
> Raymond, is there an operating system installed on the computer i.e.
> Windows95 or 98. If this is a clean HD it needs to have the system files
> transferred to it from a floppy with sys.com on it with the sys c:
command.
>
> Alan Priol.
>
>
> Was given a GATEWAY 486/33 in order for me to access 5.25 floppys. Cant
get
> the system to boot up, error message reads..." Non system disk", it thens
> jumps to BIOS setup, all settings are correct. I save and reboot but get
> same error message...I thought it would boot with a DOS SETUP disk or
maybe
> WINDOWS setup disk, thinking it had no OS installed. Still no luck..is
there
> a particular type of boot disk I need that is unique to GATEWAY to boot up
> this system?
>
> Curious about the people moderating your
> messages? Visit our staff web site:
> http://nospin.com/pc/staff.html
Curious about the people moderating your
messages? Visit our staff web site:
http://nospin.com/pc/staff.html
|