Sender: |
|
Date: |
Thu, 2 Sep 1999 19:12:04 -0400 |
Reply-To: |
|
Subject: |
|
MIME-Version: |
1.0 |
Content-Transfer-Encoding: |
7bit |
In-Reply-To: |
|
Content-Type: |
text/plain; charset="iso-8859-1" |
From: |
|
Parts/Attachments: |
|
|
Help me out, is this plug and play PCI card? NT or win98? With win98 and
an ISA card, I had to go into CMOS and under PNP/ PCI set "reset
configuration data?" to enabled and mark the IRQ I was using to legacy ISA
for my SCSI card, which is not an Adaptec but might be the same problem your
having. Once that worked, win98 saw new hardware and I could load my
drivers. For my IOMEGA JAZZ PCI, I just enabled "reset configuration data?"
and finished installing the scsi before I set up the sound devices. That
seemed to work.
Tom Turak
-----Original Message-----
Sent: Monday, August 30, 1999 1:39 AM
I have an Adaptec 1542b host adapter that I had running fine on a PI133 with
5 devices (2 scsi cd-rom, 1 drive (I boot from an ide drive), a zip drive
and a scanner). I have upgraded to a PII400 and now I cannot get the card to
work at all. It is terminated properly. I have tried just using internal and
just using external devices and it absolutely will not work. I have gotten
the error cannot find id#0 lun#0 on bootup sometimes but that is it. It
shows up as a conflict in device manager but there isn't one. I have the
latest drivers, etc. Does anyone have any ideas, I am unable to use half of
my machine because of it. Thanks.
Shawn M. Shea
Microsoft Certified Professional
E-mail - [log in to unmask]
Curious about the people moderating your
messages? Visit our staff web site:
http://nospin.com/pc/staff.html
|
|
|