Subject: | |
From: | |
Reply To: | |
Date: | Wed, 24 May 2000 00:42:55 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Yes, I have heard that especially the 2940 adaptec was picky about bus
speed. I will remove the 2930 and see if that helps. The SOYO board also
uses the LX chipset, which one vendor(AZZO) says can't handle higher than 66
bus speeds - which I doubt, since the board includes 68, 75 and 83, and is
now running great at 68. Unfortunately I can't change the cpu core voltage
with this board, but the chip has run well on a BH6 at 100 bus at 2.0 vcore,
so I don't think its the cpu. Thanks for the info on the Diamond cards -
are these PCI or AGP? (I do have an agp slot on this board.) Thanks, Edna
Sloan
Date: Tue, 23 May 2000 23:02:09 -0400
>From: "Jose E. Dominguez" <[log in to unmask]>
>Subject: Re: 75/83 bus - more
>
>One of the cards that danced well at 83 was the Diamond Stealth card,
that's
>what I have in both systems I run at 83. One system has a WD drive, the
other
>had a Seagate which I now replaced with a Seagate Barracuda 7,200 RPM
drive.
>
>It sure sounds like video, the drive will prevent you from booting and it
will
>get corrupted rahter quickly. I had not noticed your mention of a SCSI
card.
>Even though is not a drive controller SCSI cards, especially Adaptec, don't
like
>to run above the rated bus speed. Remove the card and see what happens.
Another
>thing, can you up the CPU voltage a tad?
>
>HTH,
>
>Jose
Do you want to signoff PCBUILD or just change to
Digest mode - visit our web site:
http://nospin.com/pc/pcbuild.html
|
|
|